Categories

{{ selectedCategory.name }}

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!

ARM Cortex-M: How to manually configure DWT Data Comparator 1?

05-Jul-2021

For specific use cases and linking the Comparator 1 winIDEA offers manual configuration of the DWT module. Use cases cover comparing values on Address or/and Data with an option Ignore LSB bits:


1. Address
  • Compare on Address on Data Access
  • Compare on Address Range on Data Access

2. Address and Data
  • Compare on Address and Data Value on Data Access
  • Compare on Address Range and Data Value on Data Access

3. Address 1 / Address 2 and Data
  • Compare on Address 1 or Address 2 and Data value
  • Compare on Address 1 range or Address 2 range and Data value

A more simple configuration is possible via Analyzer Configuration / Profiler tab dialog and Profiler Data Area dialog.


More resources:

Follow Tutorial Tracing with iSYSTEM tools which will guide you through basic configurations.

Was this answer helpful?

Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.

Similar topics

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No similar topics found!

Other topics in the same category

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!