Categories

{{ selectedCategory.name }}

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!

How to configure BlueBox IP address manually?

29-Jun-2021

In certain network situations BlueBox will not automatically receive an IP address. In such cases it is possible to set a fixed IP address manually. 

To set up the TCP/IP-Connection manually the BlueBox will need to be connected temporarily to the development PC via USB cable


Possible solution:

  1. Connect BlueBox to the development PC via the USB cable. 
  2. Turn on the BlueBox.
  3. Select communication type DEvice USB  in Hardware menu / Hardware / Communication tab.
  4. Test the communication. 
  5. Open the Hardware menu / Hardware Type tab again and click System Configuration 
  6.  Box Obtain IP address automatically should be unchecked.
  7.  Key in your chosen fixed IP address manually.
  8. Press the button Apply changes  and Test the connection in Communication tab.

If winIDEA says that the IP address is incorrect, check if the checkmark is set to USB in the Communication tab.


More resources:

More information in winIDEA Help.

Was this answer helpful?

Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.

Similar topics

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No similar topics found!

Other topics in the same category

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!