You were attempting to extend the Debug Adapter cable with an additional cable. This extension resulted in a loss of connection to the target and debugging became impossible.
The functionality of the BlueBox cannot be guaranteed when additional cables are used, which are typically intended for rare situations when the standard debug adapter faces challenges connecting to the target due to physical obstacles.
If longer cable lengths are required for your debugging setup, consider using an alternative solution such as an Active Probe. This setup allows for the use of FNet cables that can be up to 10 meters long, providing greater flexibility in cable length.
In case you still consider prolonging the cable, it is often necessary to experiment with cable lengths to determine the maximum allowable length for your specific setup. Start with shorter cables and gradually increase the length while monitoring the connection and debugging performance.
Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.