These configuration steps are required to connect iSYSTEM BlueBox to the Target and perform CPU Reset command, which establishes initial Debug connection.
RH850 devices feature LPD debug interface. If the default LPD clock setting doesn’t work, it is recommended to lower the LPD clock below 4 MHz under the Hardware menu / CPU Options / SoC tab. LPD clock value in kHz can be manually typed in.
RH850 devices usually provide a 128-bit or a 256-bit Security ID code to prevent unauthorized access to the RH850 on-chip debugging resources. Matching Security ID code must be entered in the Hardware menu / CPU Options / SoC to connect to the target device.
A blank RH850 device comes with all bytes 0xFF in the Security ID code area. Use debug interface protection with caution since the device can unintentionally become inaccessible.
Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.
{{ topic.Content }}