Categories

{{ selectedCategory.name }}

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!

NXP/ST Power Architecture Stellar SR6P6 and SR6P7/G7: JTAG Password to unlock debug interface with JTAG Password

16-Jan-2024

Possible solution

1. Open Hardware / CPU Options / Reset.

2. Add a custom EVE script Connect To SoC Using TnDCM Reset to Initialization before Programming / Connect.

3. Check the Same as Programming in Initialization before Debug Session section. 


4. Edit the script parameters via the arrow button.



If HOST debug protection is selected HOST password is written. If HSM debug protection is selected HSM password is written. If both protection is selected both passwords are written.


SR6P7/G7 devices have a HOST password only.


More resources

Was this answer helpful?

Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.

Similar topics

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No similar topics found!

Other topics in the same category

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!