Categories

{{ selectedCategory.name }}

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!

NXP MPC563xM: Slew rate of Nexus pins

15-Jul-2021

An errata is related to the Nexus port on MPC563xM devices. Slew rate on Nexus pins remains slow when Nexus is enabled. 


Possible solution: 

Use below initialization sequence to change the slew rate of Nexus pins.

Check the errata document for your target device to see if this issue is still applicable.

S 0xC3F901F6 W 0x000C
S 0xC3F901F8 W 0x000C 
S 0xC3F901FA W 0x000C 
S 0xC3F901FC W 0x000C 
S 0xC3F901FE W 0x000C 
S 0xC3F90200 W 0x000C 
S 0xC3F90202 W 0x000C
S 0xC3F90206 W 0x000C 
S 0xC3F90208 W 0x000C

See Initialization Sequence chapter in winIDEA Help for more details on initialization sequence configuration.

Was this answer helpful?

Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.

Similar topics

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No similar topics found!

Other topics in the same category

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!