Categories

{{ selectedCategory.name }}

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!

Infineon TriCore: License error 15

21-Oct-2021

After trying to flash your device winIDEA displays the following error message: License error 15: These licenses are not present on FNet_1 - TC1xx/TC2xx. 


Possible solutions: 

1. Proper debug licence is required. 

Check if you are using or have purchased a suitable license for your device.

For example:

  • You selected TC1xx or TC2xx device in winIDEA, but you have a license for TC3xx.
  • You are using an Active Probe, but you have a license for DTM. 


2. Required license is not programmed into the Active Probe.

Follow the procedure described in How to request a winIDEA license?


3. Wrong CPU selected. 

Select a correct CPU Device in Debug / Configure Session / SoCs / SoC. 


4. License is present on the DTM, not on the Active Probe, but you selected Active Probe. 

Open Debug / Configure Session / SoCs / SoC and select System in the Probe drop-down.


More resources:

Was this answer helpful?

Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.

Similar topics

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No similar topics found!

Other topics in the same category

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!