Debug session with Cypress Traveo II VIRGIN (life cycle) devices will be established partially - the core will not be stopped at the start of user application.
Debugging VIRGIN devices is not supported from winIDEA 9.21.29. To inspect if you have a VIRGIN device refer to topic Reset and Flash programming fails.
1. Open Hardware / CPU Options / CoreN.
2. Set option Preset PC after stopped in init to Preset to Entry Point.
Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.
{{ topic.Content }}