Categories

{{ selectedCategory.name }}

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!

How to assemble Emulation Adapter and Extender?

14-Mar-2024

When assembling the Solder part and Extender part make sure to:

1. Align parts with pin 1. All pins on the solder part must be aligned with the pins on the Extender.

2. Gently push down in the middle of the Extender in the direction of the Solder part.



Why Extenders?
  • Extenders can be stacked to gain height between the Emulation Adapter and the Target if surrounding components are high and prevent connecting the Emulation Adapter. Keep the number of Extenders at a minimum since every Extender degrades the signal integrity of the electrical signals.
  • Extender provides protection from damaging the Solder part if the Emulation Adapter setup is too frequently assembled and disassembled.


More resources

Was this answer helpful?

Sorry this article didn't answer your question, we'd love to hear how we can improve it.
Note: This form won't submit a case. We'll just use it to make this article better.

Similar topics

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No similar topics found!

Other topics in the same category

{{ topic.Title }} {{ topic.Ddate | formatDate }}

{{ topic.Content }}

No topics found!